Select Page

PVC spacers for glazing

SWISSPACER – THE “WARM EDGE” OF INSULATING GLASS SPACERS

What is the spacer?

On the edges of the glass of your window is located the spacer – a long silver bar between the glasses and the window frame. It separates both panes and at the same time connects the glass part with the window frame. The gap between the glazing panes, filled with inert gas or air, is a key factor for the effective insulation of the window. However, the spacer creates a linear thermal bridge with a considerable length within the window.

They are normally made of aluminium or steel. However, when using metal profiles for spacers, a certain amount of heat in the room runs out through them, and the cold slips from there into your home. The benefits of glazing are reduced, which in turn leads to the appearance of condensation.

What is a „warm edge”?

The term “warm edge” describes the spacers with improved heat insulation parameters that are an innovative solution in the transition from conventional double glazing to energy-efficient glazing. The warm edge is achieved most effectively with its innovative SGG SWISSPACER spacer made of highly insulating plastic.

ADVANTAGES OF THE SWISSPACER SPACER:

Better heat insulation:

The improved SWISSPACER spacer is superior to its optimized heat transfer resistance. Its coefficient of heat transmission is significantly lower than that of aluminium spacers and allows you to reduce your heating expenses by up to 5%.

Higher comfort:

Thanks to its exceptional insulating characteristics, SWISSPACER maintains a higher glass edge temperature, which significantly reduces the risk of condensation. This, in turn, reduces the accumulation of harmful mould and mildew on the window. Higher temperature along the edge of the glass emits less cold, providing more comfort in the room and a healthy indoor climate. The reduction of condensation is also linked with prolonging the life of your windows.

When using the traditional aluminium spacer, condensation along the edge of the window is formed at temperatures below -1°, and with SWISSPACER spacer, the condensation begins to form only when the outside temperature drops below -10°.

The table compares the different types of spacers for double and triple glazing. You can see how the Swisspacer coefficient of heat transfer decreases and the temperature on the surface of the glass increases.

Look at out projects

Contact us now